EXHAUSTO VEX308
X308 provides decentralised ventilation with heat recovery – a reasonably priced and effective solution to poor internal climates. VEX308 is ideal both for schools and institutions and for office environments.
In schools, poor air quality can make pupils unresponsive and lacking in concentration. This means a poorer learning environment for pupils and unsatisfactory working conditions for teachers.
Location
VEX308 can be installed at the precise point where the need for ventilation arises, whether the inlet/exhaust is through an outer wall or the roof./VEX308_placering.jpg)
/Alex_tired.jpg)
Eliminate poor internal climate
- Ensure air is changed regularly with ventilation
- Keep the CO2 level below 1000 ppm
- < hot too get not do rooms so temperatures>
/pakkelosning_CO2.jpg)
Accessories
- Integrated water heating coil with MVM motor valve and closing damper
- Integrated electric heating coil
- Condensate pump
- HMI control panel
- Closing damper with spring return (required for water heating coil)
- Closing damper for vertical exhaust
- Outside aluminium wall grille
Installation through wall or ceiling?
As delivered, VEX308 is designed for wall installation. It is possible to move the spigots to the top of the unit, thus permitting ceiling mounting, for example with a roof-top exhaust through roof cowls.
/VEX308_vaeg_og_loft.jpg)
Unique benefits:
- No duct system
- Frost protection through bypass deicing
- Internal heating coil (electrical or water)
- Integrated EXact2 control system
- Control system programmed at factory
- Optimum energy-saving operation via humidity or CO2 sensor and PIR sensor (PIR)
- Automatic closing damper (exhaust side)
/VEX308_icon_plug_learn.jpg){kind=icon}
VEX308 is supplied ready to use with "Plug-n-learn" and only needs connecting to the electricity supply. The integrated PIR sensor starts up ventilation when the room comes into use. Air flow is automatically controlled by CO2 or humidity sensor.
See more about "Plug-n-learn" under the "Package solutions" tab.
Keep in touch with web server!
Additional purchase of a web server for the VEX 308 enables the integrated EXact2 control to communicate with the DDC unit via:- Modbus RTU RS485
- Modbus TCP/IP (additional purchase)
- MLON (additional purchase)
The EXact2 control system gives access to:
- Control of temperature efficiency
- Regulation of supply air or room temperature
- Control of dampers
- Weekly timer
- Night-time cooling
- Cooling recovery
/icon_online_tools.jpg){kind=icon}
/pdf_icon.gif){kind=icon}
VEX308 Product informationVEX308, diagram air velocityVEX308, PIR-sensorDownload further information
Video on VEX308
/VEX308_icon_plug_learn.jpg){kind=icon}
Calculate the CO2 level as well as sound and energy data.
/co2-beregner.jpg)
Calculate the CO2 level and the air volume in the room.
